Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - the PMO

Pages: 1 [2]
16
MV-General Production / Re: midi: two keyboards+mv88+mc505+mc303?
« on: April 20, 2018, 05:50:09 pm »
I suppose it's also worth checking if your other devices have a setting that needs to be enabled to pass clock on. I know my some of my gear with internal sequencers are like that.

17
MV-General Production / Re: midi: two keyboards+mv88+mc505+mc303?
« on: April 19, 2018, 07:18:26 pm »
 It depends on what you mean by sync and how you want to use the keyboards. If you want to use the MV clock it has to be first in the chain. Everything down chain should go from the MV midi out to the midi in of the next device and from its thru to the following device midi in and so on. If you want to sequence all this gear from the MV it would be wise to change all the midi channels so each device is on its own channel.

18
MV-Modifications / Re: SSD Mod for MV8800
« on: April 15, 2018, 03:04:01 pm »
I was able to add this SSD today:

You are not allowed to view links. Register or Login

 It went pretty smoothly as it's just a plugin and play and there doesn't appear to be any issues so far.

19
MV-Modifications / Re: Mv8800 Fan Mod
« on: April 15, 2018, 02:57:06 pm »
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
@chino

Do you happen to know what two color wires you spliced onto with the low noise adapter of the NF-A8? There are four so I'm assuming you splice on the two and cover and tuck away the other two?

Any info is appreciated!

I matched the black(ground) wire to the black ground wire of the adapter. The red power wire I matched to the color wire of the adapter. I believe the white wire on the adapter is the power wire. The other wires I carefully capped with a plastic electrical end cap & tucked away safely.

I successfully did this mod to my MV today. I can confirm that the power wire for the NF-A8 is the yellow one. So you attach the black to black and the yellow to the red wire on the MV fan harness.

20
MV-Basement / Re: Where y'all from?
« on: February 16, 2018, 05:53:18 pm »
The frozen prairies of Canada

21
MV-Modifications / Re: Mv8800 Fan Mod
« on: January 20, 2018, 07:14:45 pm »
@chino

Do you happen to know what two color wires you spliced onto with the low noise adapter of the NF-A8? There are four so I'm assuming you splice on the two and cover and tuck away the other two?

Any info is appreciated!

22
MV-General Production / Re: Sticky: Post YouTube tutorials here!
« on: January 20, 2018, 09:06:59 am »

Pages: 1 [2]